How a pour actually runs.
No mystery and no vanishing crews. Here is exactly how a Grayline job moves from the first call to a sealed, walked, finished surface.
Six stages, every job.
Whether it is a garage coating or a structural slab, the work runs through these six stages in order.
Consult & Walk
We visit the space, take measurements, and talk through how the surface will actually be used before quoting a number.
Sample Board
You approve a physical sample in the exact color, finish, and sealer we will pour. No surprises after the truck leaves.
Formwork & Prep
We build our own forms, set reinforcement, and prep the substrate. The unseen work that decides whether a finish lasts.
Pour & Place
Concrete is placed, screeded, and floated by finishers, not laborers. Timing is everything and we own every minute of it.
Finish & Polish
Grinding, troweling, stamping, or coating, depending on the system. This is the stage the whole crew is built around.
Cure & Seal
We cure the slab properly, apply the sealer you approved, and walk the finished work with you before we call it done.
The part most crews skip.
Concrete keeps working for weeks after the truck leaves. Rush the cure and you trade a few days now for a lifetime of dusting, curling, and premature cracks.
We cure every slab properly and apply the exact sealer you approved on your sample board. Then we walk the finished work with you, point by point, before we ever send an invoice. A job is not done when the concrete is hard. It is done when you have seen it and signed off.
Process questions.
Does polished or sealed concrete crack?
Concrete moves, so we control where it cracks instead of pretending it will not. Saw-cut and tooled control joints are placed by design, and on decorative work we lay them out to read as part of the pattern.
Can you finish concrete that is already poured?
Often, yes. Existing slabs in sound condition can be ground and polished, skimmed with microcement, or coated with resin. We test and moisture-check the slab first and tell you honestly if it is a candidate.
Is this work suitable for the Front Range climate?
Everything we pour outdoors is mixed, air-entrained, and sealed for freeze and thaw. Indoor floors are unaffected by weather. Climate is exactly why we do our own formwork and curing rather than sub it out.
Ready to start?
We will walk the site, sample the finish, and give you a real timeline.